Any luck on replacing the tensioner pulley. I have the same bearing rattle on cold starts!
Serpintine Belt Noise ??
Hi there,
2006 xterra,Purchased back in may 18,000 mi., developed belt noise 2 weeks after purchase, changed to new belt and tensioner, good for another 2weeks, noise came back ?? checked pulley alignment noticed power steering pulley about an 1/8 inch out, no problem to it to work machined as required, cleaned all pulleys with brake cleaner and wire brushes, sqwealing noise back again?? starts out with chirping at start up and goes away as it warms up, as days go by it (the noise) continually gets worse untill its sqwealin all the time,change belt repeat process, any ideas, your imput would be greatly appreciated !!!
thanks Steve
2006 xterra,Purchased back in may 18,000 mi., developed belt noise 2 weeks after purchase, changed to new belt and tensioner, good for another 2weeks, noise came back ?? checked pulley alignment noticed power steering pulley about an 1/8 inch out, no problem to it to work machined as required, cleaned all pulleys with brake cleaner and wire brushes, sqwealing noise back again?? starts out with chirping at start up and goes away as it warms up, as days go by it (the noise) continually gets worse untill its sqwealin all the time,change belt repeat process, any ideas, your imput would be greatly appreciated !!!
thanks Steve
1 - 3 of 9 Posts
cold start rattle
Ok so by replacing the belt you got the noise to stop.
Ok so by replacing the belt you got the noise to stop.
!0-4 your probably right. Just trying to trouble shoot. Appreciate the help...
1 - 3 of 9 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan XTerra Forum
A forum community dedicated to Nissan Xterra owners and enthusiasts. Come join the discussion about superchargers, modifications, troubleshooting, maintenance, overlanding, towing capacity, and more!
Full Forum Listing
