Nissan XTerra Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
621 Posts
Still a bit of trimming for a 3 inch with 35s. You wont rub at regular height but under flex you will. And 35 would be too much for stock gearing. My dads jeep on 35s with a pentastar v6 (285 ponys) is a gutless dog on take off. My x with 31s eats it alive from a dead stop. Re gearing would be needed pretty bad.
 

· Registered
Joined
·
621 Posts
3 inch is fine for 33s. 2 inch bl with 33s is also fine. 35s if you have a properly setup suspension is good. Grassroots kit with heavy duty tie rods you would be alright as far as the front end goes with wearing.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top