Nissan XTerra Forum banner

knock sensor wiring

2164 Views 3 Replies 3 Participants Last post by  dejablue
I am doing the knock sensor relocation. So I bought a new harness, but it had the wrong knock sensor plug on it. I got a new plug for the sensor and wired it to the new harness. the plug that i cut off only had 1 wire going to the knock sensor but there are 2 wires on the other side of the harness. do i need both of the wires or just one?
1 - 2 of 4 Posts
Both wires and if the code comes back flip the wires.
First bolt on the intake passenger side , you will need a new bolt about 3/4 in longer.
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.