Nissan XTerra Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Tape off the lights, Use 1500 Wet/dry sandpaper ONLY, even if the headlight defects are severe, this is becuase the lower grit creates deep grooves as well, and is sometimes a lot more work to get out. Get the headlight to a smooth white haze then use a high RPM buffer (1500 plus) with Turtle wax Brand Polishing Compound. Be careful, not to spend to much time in any spot as to NOT burn the plastic.
 

Attachments

1 - 1 of 1 Posts
Top