Nissan XTerra Forum banner

Does this wheel/tire combo work? (Time sensitive)

2557 Views 10 Replies 4 Participants Last post by  cvrrie
Howdy. I have an 04X and am going to put a 2" BL on. My plan was BFG AT 33x12.5r15, with the wheels linked below. Would this work? I've done my best to research how rims are sized and looks good to me but I'm not sure. I only say time sensitive because tire kingdoms buy 2 get 2 ends tomorrow and that seems smart to do.

Pro Comp Steel Wheels Series 51 Wheel with Flat Black Finish (15x8"/6x5.5")

1 - 3 of 11 Posts
Have fun cutting metal with that 3.75 BS.

I thought with a lower BS like that they'd stick out a little more which would give me more clearance?

Sent from my iPhone using Tapatalk
What SRStaff is talking about is behind the front wheels. You'll have to remove the entire plastic piece cut some of the inner and bang the rest up if you want 33s. The 3.75 bs is best suited of going 3" sl. I have the procomp series 97s 15x8 3.75 bs, 33" MTs, 2" bl and pml.
I dont know about SRStaff but i did the BL, wheels and tires followed shortly by the PML. your understanding is correct for the PML.
I used my dremel with reenforced cutoff wheels
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.