Nissan XTerra Forum banner
1 - 7 of 7 Posts

· Registered
2004 Nissan Xterra, 4x4 S/C
Joined
·
348 Posts
Discussion Starter · #1 ·
Do yourself a favor and get a high quality exhaust for the X if you're replacing yours and AVOID 'Walker' brand exhausts.

Got mine end of 2019. 'Quite Flow' Walker line. They claimed it was a stainless steel muffler and aluminized steel pipes (similar to galvanized). Lifetime warranty...

Well, this is how their 'stainless' exhaust looks like after 3 years:



The Nissan OE exhaust was on the truck for 15 years and looked better than this when I took it off...

The pipe on this piece of garbage rusted right through and broke off, so was forced to replace.

They tried to wriggle out of it, but in the end stood by their warranty, which is good at least. But I did not appreciate the couple of hours of my time lost with the dirty work of cutting off this rust bucket from under the truck... I have so many other better things to do.

I hate when companies make garbage and mislead consumers. End of rant.
 

· Registered
2015 Xterra Pro-4X
Joined
·
2,898 Posts
Do yourself a favor and get a high quality exhaust for the X if you're replacing yours and AVOID 'Walker' brand exhausts.

Got mine end of 2019. 'Quite Flow' Walker line. They claimed it was a stainless steel muffler and aluminized steel pipes (similar to galvanized). Lifetime warranty...

Well, this is how their 'stainless' exhaust looks like after 3 years:
View attachment 80825
View attachment 80826

The Nissan OE exhaust was on the truck for 15 years and looked better than this when I took it off...

The pipe on this piece of garbage rusted right through and broke off, so was forced to replace.

They tried to wriggle out of it, but in the end stood by their warranty, which is good at least. But I did not appreciate the couple of hours of my time lost with the dirty work of cutting off this rust bucket from under the truck... I have so many other better things to do.

I hate when companies make garbage and mislead consumers. End of rant.
Nothing stainless or aluminized about that hardware. It can be good practice to put the magnet to it before installing it to see if it's as advertised. Walker may not be at fault. The supplier may have pulled a switch and sold you steel for stainless prices.
 
1 - 7 of 7 Posts
Top