Nissan XTerra Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I bought a new headunit, thought I could wire it up. Without using a harness. Failed Miserably, The head unit I need, needs the following wires:

Ground
+24vAccessory/Switch
PowerAntenna/AmpTurnon
+24vConstantPower Supply
Rear Left +/-
Front Left +/-
Rear Right +/-
Front Right +/-

Now, I hooked them up using wire colors from a 2001 from a previous post. I got power to it, but no sound. All wires were connected and antenna was plugged in. but no sounds. I'm 18 and this is my first time doing this. Any help?

2000 Xterra SE, the old radio was the stock. Clarion PN2199H-C. Trying to put in an inexpensive Pyle PLTR25UB
 

·
Registered
Joined
·
23 Posts
Those adapters are worth the money. I sat in front of the TV and soldered the two hareneses together. During the install, it's just plug and play.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top