[SavedByGrace]

I can not remove these things... It's like they are. I'm convinced that the metal nose and the hose have "become one". I'm sure some people on here know some tricks that might help. I can get my hand back there and pull down on it, but it's still not bulging. Help me before I decide to make this car a shooting target.

 

[dejablue]

cut the hoses and get new one with new screw clamps they are dried out

 

[KBCL]

Shove a pick or something thin between them and work it around and they should pull off but getting new ones as well with real clamps is good advice.

 

[SavedByGrace]

What's the name or part number of the hoses? Will any parts store sell them?

 

[SavedByGrace]

cut the hoses and get new one with new screw clamps they are dried out

I cannot find the hoses anywhere online. Not ones that look like it atleast. I'm not even completely sure what to search for.

 

[dejablue]

Here is the complete under intake set.
http://www.ebay.com/itm/GENUINE-NIS...05&prg=8888&rk=6&rkt=12&sd=350914146898&rt=nc

 

[SavedByGrace]

Here is the complete under intake set.
http://www.ebay.com/itm/GENUINE-NIS...05&prg=8888&rk=6&rkt=12&sd=350914146898&rt=nc

I'm definitely not looking to spend that much money, already put a lot into other things. I only need those 2 hoses, can I by them seperately? Which hoses are they?

 

[Mogman]

I cannot find the hoses anywhere online. Not ones that look like it atleast. I'm not even completely sure what to search for.

http://www.courtesyparts.com/xterra.../211-water-hose-piping/-c-532_14_467_471.html

 

[SavedByGrace]

I can't find the hoses on that diagram, I'm probably overlooking them. Can someone please point them out for me? I just really want to make sure I can get replacements before I cut them!

 

[cbxterra]

can't remember the inside diameter [is it 3/4 inch?] but all I did was pick up a 90 degree preformed elbow and a piece of straight rad hose a foot long then cut then to fit. if you go this way keep the cut off old hoses. they can be used as patterns for the right length.

 

[SavedByGrace]

Thank you very much man!

 

[cbxterra]

you're welcome