Nissan XTerra Forum banner
manual hub
1-6 of 6 Results
  1. Repair Questions
    2001 3.3L Had to convert to manual hubs when the auto locker explodoed when changing wheel bearings. I hear a whirring noise when driving in 2WD with hubs locked, goes away in 4WD. Is this just normal drivetrain noise or something to be concerned about? I’ve had the hub assemblies apart like 3...
  2. Repair Questions
    So the 6 allen headed screws that go around my manual locking hub keep coming unscrewed overtime. Its only the front drivers side hub that does this, but when they are unscrewed that tire doesn't seem to be spinning in 4wheel drive. I can screw them back in and the tire will spin again, but...
  3. Repair Questions
    I, like many of us, experienced the plastic part of the cam assembly in my auto-locking hubs breaking on me while I was tightening my wheel bearings down last night. Replacing the hubs this next weekend and have found these... Just seeing if anyone out there has had any experience with them...
  4. Offroad Drivetrain
    Auto Locking Hub gone bad Fixed Cam Plastic Crap Busted, Warn says they do not make one to fit 2002 xterra XE. I ordered aftermarket from JC whitney that they said would fit. However the 6 bolts that hold the hub on are to long. Has anybody experienced this problem? Has anybody with a 2002...
  5. Repair Questions
    Hello Xterra lovers - Winter is upon us here in Boston and thus I tried to engage my 2003 xterra into 4x4. The green light comes on the dash however it never engages. I fishtail all over the place. Brought it to my mechanic and after some work he found out the hub is bad (or so he thinks)and...
  6. Repair Questions
    I'd like to replace a broken auto-locker factory hub and was looking at the manual hubs. I'd like to pick up a set of WARN premium hubs but for the life of me I can't find the appropriate part number for the 2004 Xterra. It looks like the Warn # 29091 might be the right part, but on the warn...
1-6 of 6 Results
Top