Nissan XTerra Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Repair Questions
    Polyurethane bushings are a nice upgrade and easier to replace compared to the OE metal sleeve 'pressed in' rubber bushings which are a pain to get out when they wear. Unfortunately, I found it impossible to figure out which kit I needed; Energy Suspension doesn't list the X as an option in the...
  2. Repair Questions
    Hey guys! New here! Just bought an 04 supercharged X! Very excited about it! Getting a few things done to it before I take it on a trip and the first thing is gonna be the ball joints and control arm bushings and then an alignment. But im having some trouble finding out what UCA bushing i need...
  3. General Discussions
    I'm running Bilstein 5100, those didn't come with upper shock bushings, so I reused the old OE ones. Now they are cracked and falling apart, so I need to replace. Does anyone know any aftermarket sellers? I realize has all the things, but I'm in Canada and ordering from them is...
  4. Repair Questions
    Can anyone help identify these two items please? The true name or part ID would be extremely helpful in identifying them for purchase. A. Bushings for the vapor canister purge valve bracket B. Upper white clip that holds the EVAP Service Port line to the firewall I can't seem to find either...
  5. How To's, DIY and Write ups
    Two reasons for this: 1: I'm a noob. I'm hoping that if I did something stupid, one of the many helpful people on this site will let me know so I can fix it :) 2: I didn't see a write-up on this. I know this is pretty basic for a lot of you, but maybe it will help the next guy (like me) that...
  6. Repair Questions
    I know this has been a discussion, I figured I could start a fresh thread on this issue. I deflated my tires from the MAX PSI 44 down to 36 PSI because the placard calls for 30PSI and my steering is tight and I do not like the sluggishness of low tires. So after I deflated to 36 PSI I gained...
  7. General Discussions
    Where can I buy the outter sleeves for my new polyurethane bushings on my control arms?! 2002 Xterra, 4x4, using original A-arms but old sleeves were cut out. Need link asap!!! Help!
  8. FAQ/Common Questions
    Before I start taking things apart, can someone tell me if the bushings are "Offset" or not? Meaning does the hole go more off to the side rather than the center of the bushing. Not sure if I got the right bushings. Need reply ASAP! PS If you know where to get rear leaf spring polyurethane...
  9. General Discussions
    I need to replace the stock bushings and want the polyurethane bushings. Where do I find the exact fit bushings?
  10. Repair Questions
    Instead of buying new A-Arms, can I buy somewhere REPLACEMENT BUSHINGS and press out the old and press in the new?? A link would be appreciated. 2002 XTERRA 3.3, 4X4
  11. Modification Questions
    Hi All: First post here. Just getting started mod-ing my 2000 X. Only had it for 10 years. :) Anyway quick question about PML. Did anyone find that they needed to replace the shackle and/or leaf spring bushings when they were doing their PML? I know the stock bushings are rubber so figure...
1-11 of 11 Results