2001 3.3 SE 4wd auto My one of the driver side brake caliper slide pins froze up pretty good. Obviously the pad wore very unevenly. With some PB blaster and a torque wrench I got the pin free. Question: Would you... A. Sand/wire brush the pin, grease it up and re-use it? B. Replace just the...

Hi How do I bleed the ABS module on my 2012 Xterra. Is there a way to do it without a pro scan tool? My Brake pedal is sinking and have already replaced the master cylinder. No ABS or check engine light. Thank You

I have a '01 Xterra and I noticed my hatch door brake light is not working so I am just curious what bulbs go into it so I can fix it

so i just bought led brake lights from ebay... i checked to make sure they went in correctly. they are 3157s i think. but for some reason, they wont work. at all. not with running lights, brakes depressed, anything. do i need a thing to put on my fuse or something? the fuse is good... the normal...

i just recently traded my hb in for a 2009 xterra 4x4. i still have factory warranty left so i'm looking for anything wrong.i have 31000 miles on it. sometimes when i brake i hear a soft pop or creak coming from front wheel area i think. reminds me of back in the day when you would hit the...

I need to locate/isolate the "outgoing" wire from the brake light switch. I need to know which wire goes from the brake switch on the pedal arm to the brake lights. I can't find a good wiring diagram that explains which wire is which. I don't have a test meter or test light (though I could rig...

Well since my brake pads started sqeaking a week ago I decided it was time to replace them... I figured about 20 mins per side once I had all the parts. But, after I had taken off the tires I realised that I would have to replace the rotors as well as they were quite worn down and would probably...

I have a 2001 X and my ABS light has started to come on every once in a while, I have not seen any pattern as to my braking causing this... Does anybody have any idea what the issue could be? Thanks! -Erik