Nissan XTerra Forum banner

Rear wiper blade replacement

7K views 5 replies 3 participants last post by  Dimo 
#1 ·
I searched around and didn't find anything or maybe I'm just having one of those idiot moments. Is there a specific brand I need to use? I picked up an Anco 14 inch because that was the only one in the correct size, but it will not fit on the wiper arm. Any help would be appreciated!
 
#3 ·
It will. The plastic part on the arm pops off with some work. Then you just see the "J" hook at the end of the arm. At that point it will fit.

Chuck
 
#5 ·
That box is not permanently attached. I was able to pry mine off (I think it popped in half). Once it is off then it looks like a normal wiper blade arm.

Chuck
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top