Let's try this again.
First I would like to apologize to CX.org for the last thread that violated the rules about cross posting of a group buy by a non-paying vendor. I will be in contact with Autoguide to find out the details on becoming an approved vendor. Until them I will do my best to watch what I say a bit more.
Now to business.
Who We Are
P&P Engineering is a group of designers, engineers and fabricators with over 10 years experience in mechanical engineering, test engineer and CAD design experience. Our fabrication staff has 12-years experience in all aspects of fabrication from sheet metal to structural steel components. We have a certified welder, experienced in all disciplines, who is always looking for an opportunity to do some old school gas welding. We have poached one of our most valuable resources from a Tier 1 supplier to the automotive industry, who brings several years experience leading the quality control department.
We will find a way to break anything & everything. Then make it better through science. We have designed, tested and manufactured parts, systems, processes, machines and more from napkin sketches through full production in the aerospace, pharmaceutical and automotive industries.
What We Do
P&P Engineering uses the maths to make life better, faster, stronger. We start with the best, the craziest, the wildest ideas and we not only make them reality, we make them integrate seamlessly with the existing OEM design of the vehicle.
P&P brings together talent with project management, consulting, design & fabrication experience including race cars, internal ICE parts, engine builds, suspension components, forced induction, engine management, sound reinforcement & stage rigging, and custom motorcycle components, just to name a few.
Going forward we will continue to do incredible custom projects and offer consulting services but will focus primarily on the design & manufacture of the highest quality product line available across a diverse group of industries. Each industry we enter is chosen because of our intimate knowledge and insight. We don’t sell red lug nuts or generic blow off valves to simply make a buck.
We have been friends and members of the Nissan off-road community for many years and now is the time to become more than friends. We will be developing and introducing products for both the 1st & 2nd Gen Xterra and the Frontier, as well as some other hand selected automotive applications, continually with an aggressive release schedule covering the next 36 months. Some will compete directly with currently available products while others will be entirely new offerings to the community. Every part we make is CAD designed and precision manufactured. Every design decision we make is to fill a specific need or fix a specific problem.
Short list of Capabilities
3D CAD, Engineering & Manufacture for hire
Certified unlimited thickness Mig, Tig & gas welding
Tube & plate bending and forming
Sheet metal fabrication
Laser cutting
Light duty metal stamping
Powder coating
Water jetting
Engine Tuning
Engine Building
The Future
P&P has an aggressive design schedule spanning the next 36 months before we come up for air. There is not a single section of the truck that we do not plan to address. Will will be releasing a full line of armor, selected suspension, drivetrain, steering, maintenance engine performance products and accessories that you never thought would exist for your truck before.
P&P is a customer driven business. Customer input on needs and demand will drive the development schedule, not a marketing director. We will be working closely with our industry partners and our customers to analyze and determine the course of action that best suits the needs of the Nissan-offroad community.
First I would like to apologize to CX.org for the last thread that violated the rules about cross posting of a group buy by a non-paying vendor. I will be in contact with Autoguide to find out the details on becoming an approved vendor. Until them I will do my best to watch what I say a bit more.
Now to business.
Who We Are
P&P Engineering is a group of designers, engineers and fabricators with over 10 years experience in mechanical engineering, test engineer and CAD design experience. Our fabrication staff has 12-years experience in all aspects of fabrication from sheet metal to structural steel components. We have a certified welder, experienced in all disciplines, who is always looking for an opportunity to do some old school gas welding. We have poached one of our most valuable resources from a Tier 1 supplier to the automotive industry, who brings several years experience leading the quality control department.
We will find a way to break anything & everything. Then make it better through science. We have designed, tested and manufactured parts, systems, processes, machines and more from napkin sketches through full production in the aerospace, pharmaceutical and automotive industries.
What We Do
P&P Engineering uses the maths to make life better, faster, stronger. We start with the best, the craziest, the wildest ideas and we not only make them reality, we make them integrate seamlessly with the existing OEM design of the vehicle.
P&P brings together talent with project management, consulting, design & fabrication experience including race cars, internal ICE parts, engine builds, suspension components, forced induction, engine management, sound reinforcement & stage rigging, and custom motorcycle components, just to name a few.
Going forward we will continue to do incredible custom projects and offer consulting services but will focus primarily on the design & manufacture of the highest quality product line available across a diverse group of industries. Each industry we enter is chosen because of our intimate knowledge and insight. We don’t sell red lug nuts or generic blow off valves to simply make a buck.
We have been friends and members of the Nissan off-road community for many years and now is the time to become more than friends. We will be developing and introducing products for both the 1st & 2nd Gen Xterra and the Frontier, as well as some other hand selected automotive applications, continually with an aggressive release schedule covering the next 36 months. Some will compete directly with currently available products while others will be entirely new offerings to the community. Every part we make is CAD designed and precision manufactured. Every design decision we make is to fill a specific need or fix a specific problem.
Short list of Capabilities
3D CAD, Engineering & Manufacture for hire
Certified unlimited thickness Mig, Tig & gas welding
Tube & plate bending and forming
Sheet metal fabrication
Laser cutting
Light duty metal stamping
Powder coating
Water jetting
Engine Tuning
Engine Building
The Future
P&P has an aggressive design schedule spanning the next 36 months before we come up for air. There is not a single section of the truck that we do not plan to address. Will will be releasing a full line of armor, selected suspension, drivetrain, steering, maintenance engine performance products and accessories that you never thought would exist for your truck before.
P&P is a customer driven business. Customer input on needs and demand will drive the development schedule, not a marketing director. We will be working closely with our industry partners and our customers to analyze and determine the course of action that best suits the needs of the Nissan-offroad community.