Last Friday finished installing the AC 3" AAL lift. Ran into a couple issues, but nothing broke, which is a good thing. Aligned on Monday, new Duratracs Tuesday. Also replaced center link, TRE's/TRA's, LBJ's and idler arm (added brace). Good grief what a difference.
Upcoming: front stabilizer bar links and bushings, rotors, seals, bearing repack, pads, drums (only if they need it) and shoes + bleeding, belts (not timing), Quest alternator, plugs and wires.
ETA: Forgot to mention I installed new CV shafts, too.
AC 3" AAL
Removed stock side steps
Removed rear stabilizer bar
Last edited by DoubleZeroX; 06-08-2017 at 04:39 PM.