Nissan XTerra Forum banner

wheel suggestions

2K views 2 replies 2 participants last post by  yyyames 
#1 · (Edited)
Putting a new set of revo2's on my 04 X next monday and id like to put some plain steel black wheels on. I read on another forum that these wheels dont fit well because of the center hole. Is this true what size do it need for the 75 revos? 16x7?
 
See less See more
1
#2 ·
Are you putting them on a 04 X or a second gen cause the picture is of a second gen.

As for the center bore you need to make sure it has a center bore of at least 104mm I believe as that's the width of the locking hubs on the first gen X. Now if you have a second gen then that is totally different cause they use a completely different hub system.
 
#3 ·
Are you putting them on a 04 X or a second gen cause the picture is of a second gen.

As for the center bore you need to make sure it has a center bore of at least 104mm I believe as that's the width of the locking hubs on the first gen X. Now if you have a second gen then that is totally different cause they use a completely different hub system.
1st gen should put a pic of a 1st...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top