Nissan XTerra Forum banner

running board bolt size

8K views 4 replies 3 participants last post by  Jubil22 
#1 ·
Hi folks, I'm new here and did a search to find my answer with no luck.
I removed the running boars on my wife's Xterra and tossed the bolts by accident. She wants them put back on and was wondering what size the bolts were and if they are fine or coarse thread.
Thanks in advance for your help.
 
#2 ·
If you are talking a Gen1 00-04, the nerf bars are secured with a total of 8 bolts that are 10mm 1.25 thread, about 25mm in length. Don't forget washers and lock washers.

I have no idea if it is gen2.
 
#4 ·
Thanks Ayjay. It is gen2. Thanks for the quick help.
Your sig says you have a 2002 - which is a gen 1

Is your sig wrong?

What year is your X?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top