glazener24
09-12-2008, 08:57 PM
I finally got my Loadwarrior in yesterday. The first thing I did was give it a fresh coat of Rusoleum hammered black paint, clear coat, and installed a set of lights on the back.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0080.jpg
I ran the wires through a 1/2" PVC pipe, which you can see towards the bottom of the picture. The little box thing (not sure what they're called) is where I put the plug the lights go to.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0081.jpg
http://i117.photobucket.com/albums/o73/glazener24/IMG_0082.jpg
The PVC runs the length of the rack to the front of the X.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0083.jpg
The wire then goes through a flexible tube that goes behind the fairing and into the cabin.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0087.jpg
Lights on.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0084.jpg
One more shot of the lights wired up.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0086.jpg
Excuse the phone pics, i'll get some better ones of the whole X soon.
:wink-big:
http://i117.photobucket.com/albums/o73/glazener24/IMG_0080.jpg
I ran the wires through a 1/2" PVC pipe, which you can see towards the bottom of the picture. The little box thing (not sure what they're called) is where I put the plug the lights go to.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0081.jpg
http://i117.photobucket.com/albums/o73/glazener24/IMG_0082.jpg
The PVC runs the length of the rack to the front of the X.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0083.jpg
The wire then goes through a flexible tube that goes behind the fairing and into the cabin.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0087.jpg
Lights on.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0084.jpg
One more shot of the lights wired up.
http://i117.photobucket.com/albums/o73/glazener24/IMG_0086.jpg
Excuse the phone pics, i'll get some better ones of the whole X soon.
:wink-big: