hey guys i have a led intrior kit already but im trying to figure ou how to get behind the AC vents so that i can put 1 led bulb in each. how do i get behind it ? and what do i need to take apart to get to it ? anyone done this before?

Grab the plastic piece around your shifters, pull up to pop it off. Then grab the larger piece that the radio and vent are in, again pull on it to pop it off, be very careful not to pull too hard as you need to disconnect the plugs on the hazard light button and on the cigarette lighter. After you unplug the hazards and cig lighter, remove the piece and viola!

You may have to undo 2 screws at the bottom of the largee piece before removing it, I cant remember. Just look for 2 screws at the bottom befor you try to pull on it, if they are there you will know which ones I mean.

thx

You bet. It is pretty easy to do.

post some pics when you are done!