I picked up the lower right Aux power socket the other day out of the J-yard. As my X only had one cigerrette lighter socket... Now I'll have two. I'm ready to install this with its pig tail to power...

My question is should I splice this in to the cigerette lighterz power or route it to another supply...

This will be connected to a 4 port (amp type remocon socket that I picked up off of ebay.) I want to plug this unit below into this 2nd aux jack from the J-yard...http://imgs.inkfrog.com/pix/debug/4in1carsocket.jpg

i would just wire that unit into the stock cig lighter or put in a new fuse and run it straight from the fuse panel....

also whaty dose the switches on that unit do????? are thy like on-off switches or what....

Run it to the fuse panel using a product called an "add a circuit" It will cost you $10 but is the safest way to go. I have spliced into the cig lighter and it has caused problem. Using a splice seems to always cause problems

Ya I got 2 of those add a circuits in my shop... Damn I forgot about those!

Jason the switches are attached to a heavy remote jumper cable. Then you can switch off your GPS, CELL PHONE PWER, or PWER for you computer... what ever you want to power up or down...

I got them shipped from China... took about 2 weeks but hope it was worth the wait...

Thanks X-guys!

WADACOUNTRY...

how much did they cost ya...

how much did they cost ya...

HOW SWEEEEEET...I just pulled the lower housing off and this X is already wired for that AUX Jack...PLUG-N-PLAY...


Oh... Not bad, right around $13.00 here is the link to them!

http://cgi.ebay.com/4-in1-Car-Cigarette-Lighter-Socket-Adaptor-switch-4-GPS_W0QQitemZ280218671695QQihZ018QQcategoryZ60208Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem (http://ads.auctionads.com/pagead/link_84f97855669eb086f024_7210c8d74ed070ca97596628 a93bd1cc_http://cgi.ebay.com/4-in1-Car-Cigarette-Lighter-Socket-Adaptor-switch-4-GPS_W0QQitemZ280218671695QQihZ018QQcategoryZ60208Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)