Here are some pics and specs of my Xterra. I am adding things to it weekly, so these pics are about as new as I got.

(Updated 10/19/06)

Year: 2005
Make: Nissan
Model: Xterra 4x4 “Off Road”
Color: Ganite

Mods:

Shrockworks Sliders
Shrockworks Front Bumper
Shrockworks Rear Bumper (w/ Tire Carrier, Hi-Lift Mount and Antenna Mount)
Shrockworks Skid Plates (Full Set)
Lower Body Protection (Herculined)
Automotive Customizers 2.5" Front Coil Lift
Automotice Customizers 1.5" Rear Shackle Lift
Calmini 1.5" Rear Add-A-Leaf Lift
AC Extended Stainless Rear Break Lines
Bilstein Long Travel Rear Shocks (20% Stiffer)
BFG MT 285/75R16 Tires
Warn XD9000i Winch (w/ Amsteel Blue Synthetic Rope, Hawse Fairlead and self closing hook)
ScanGauge
Alpine HU
Cobra 75 WX ST CB w/ 4' Firestik
Hella 500 Driving Lights (mounted to bumper)
In-channel Vent Shades
Bug-Flector
Locking Roof Bin (southco)
Removed Rear Swaybar
Removed Mud Flaps
Nissan Seat Covers (Front and Rear)
ViAir 480c Compressor w/ 4 Gallon Pancake Tank (Mounted where stock spare would go.)


Recovery Gear:

Warn XD9000i Winch (w/ 125’ x 5/16” Amsteel Blue Synthetic Rope, Hawse Fairlead and self closing hook)
48” Hi-Lift
Hi-Lift Off Road Base
Hi-Lift Off Road Kit (Winch Kit)
25’ Chain w/ Grab Hooks
30’ x 3” Recovery Strap
8’ x 3” Tree Saver
Folding Shovel
(4) 3/4" Clevis Shackles
Snatch Block

When I first got it back in July 2005
http://jbeamphotos.com/albums/Xterra/Xterra.sized.jpg

Before Shrock Sliders (yeah, I got rocker damage)
http://jbeamphotos.com/albums/WPAXC_Wellsville_11-05-05/wpaxc_wellsville_051105_143652_4943.sized.jpg

Yep, big old dent
http://jbeamphotos.com/albums/WPAXC_Wellsville_11-05-05/wpaxc_wellsville_051105_143912_4946.sized.jpg

After I fixed the damage, herculined the lower part of the doors and installed the sliders
http://jbeamphotos.com/albums/Xterra_Mods_LowerProtection/xterra_lower_body_protection_051203_163038_4919.si zed.jpg

After I installed the Shrock front bumper
http://jbeamphotos.com/albums/Xterra_Seven_Bridges_Cache/geocaching_7_bridges_060219_160624_5306.sized.jpg

Another view
http://jbeamphotos.com/albums/Xterra_Seven_Bridges_Cache/geocaching_7_bridges_060219_160646_5309.sized.jpg


Some more pics (trail runs and mods): http://jbeamphotos.com/gallery/Xterra

That front bumper gives me wood!

winch!!!!!!!!

I got a winch for it. It's sitting in the garage waiting for the Amsteel rope to be put on.

sweetness!

As I said, I am adding things almost weekly.

My future mods (to be complete before ECXC in July)

Full Shrockworks Skids
Shrockworks Rear Bumper
On-Board Air (compressor under the hood and 4 gallon pancake tank where the spare was)
Wheels (someone needs to come out with 8" wheels to fit the new model X)
33" SuperSwamer Boggers (need to find out if they will fit though)

Then I am done until I feel like spending the money on the SLR 5" lift. :)

It's a 9000lb Warn so it could pull a decent sized rig on solid ground pretty easy.

Newest pics.

http://jbeamphotos.com/albums/Bidwell_03-12-06/Bidwell_20060313_088.sized.jpg

http://jbeamphotos.com/albums/Bidwell_03-12-06/Bidwell_20060313_092.sized.jpg

Musikman, I LOVE the Shrockworks bumper and sliders. Tell me they are as tough as they look. How did the install go? The first thing I found that was a MUST HAVE mod was this bumper. Unfortunately, I don't think the wife is going to let me pop $750 for that puppy. I'm saving some pennies and daydreaming...
Slas

Sorry I misspelled your name. The Z is right by the S and I am a terrible typist.

The install on both was pretty easy and straight forward. I got them in bare steel and the prep work to coat them was too much like work. When I get the rear bumper I am just getting it powder coated and then Herculine over it to keep the same look.

muzikman too lazy to do a search does schrockworks have aweb page or is local to pa. by the way your x looks great

that bumper is way bad ass :eek:

Shrockworks is out of Houston, TX. They have a web page but from what I am told it's being updated, so some of the info is older.

www.shrockworks.com

Jim Shrake is the owner and a nice guy.

The Shrock bumper is awsome. I have been contemplating putting one on my truck. Did you have an aftermarket coating applied to it or is that the way they are finished?

I got mine in bare metal and then Herculined it (DIY Bedliner). Although I love the Herculiner, I will not buy anything in bare metal again. The prep work was too hard and too time consuming.

The stock coating from Shrock is a black powder coat. You can get Gray as an option.

I just ordered the rear bumper and skids from Shrock. I got the bumper powdercoated and will be applying the Herculiner over it.

Well, finally got myself some new tires. Hopfully I won't have to muscle my way up the hills any more.

http://alleycattz.com/albums/Xterra05/IMG_0712.sized.jpg

Well, finally got myself some new tires. Hopfully I won't have to muscle my way up the hills any more.

http://alleycattz.com/albums/Xterra05/IMG_0712.sized.jpg

Muzik what year is your X?

2005, see the title. ;)

(sorry, had to add that last bit...it told me the message was too short.)

2005, see the title. ;)

(sorry, had to add that last bit...it told me the message was too short.)

And you ordered the rear bumper from Shrock? are they available yet?

Jim is taking pre-orders. I ordered it two weeks ago I think it was and at that time he said it was 4-6 weeks out before I would have it. I also ordered the skids.

Here is my current mod list.

Year: 2005

Make: Nissan

Model: Xterra 4x4 “Off Road”

Color: Ganite



Mods:

Shrockworks Sliders
Shrockworks Front Bumper
Shrockworks Rear Bumper W/ Tire Carrier, Hi-Lift Mount and Antenna Mount (On Order)
Shrockworks Skid Plates [Full Set] (On Order)
Lower Body Protection (Herculined)
Automotive Customizers 2.5" Front Coil Lift
Automotice Customizers 1.5" Rear Shackle Lift
Calmini 1.5" Rear Add-A-Leaf Lift (On Order)
AC Extended Stainless Rear Break Lines
Bilstein Long Travel Rear Shocks (20% Stiffer)
BFG MT 285/75R16 Tires
Rear Tow Hitch w/ shackle (for rear recovery)
Warn XD9000i Winch (w/ Amsteel Blue Synthetic Rope, Hawse Fairlead and self closing hook)
ScanGauge
Alpine HU
Cobra 75 WX ST CB w/ 4' Firestik
Hella 500 Driving Lights (mounted to bumper)
X-Tower Hi-Lift Mount
In-channel Vent Shades
Bug-Flector
Locking Roof Bin
Removed Rear Swaybar
Nissan Seat Covers (On Order)


Recovery Gear:

Warn XD9000i Winch (w/ 125’ x 5/16” Amsteel Blue Synthetic Rope, Hawse Fairlead and self closing hook)
60” Hi-Lift
Hi-Lift Off Road Base
Hi-Lift Off Road Kit (Winch Kit)
25’ Chain w/ Grab Hooks
30’ x 3” Recovery Strap
8’ x 3” Tree Saver
Folding Shovel
(2) 3/4" Clevis Shackles
Snatch Block (On Order)

Here is my current mod list.

Year: 2005

Make: Nissan

Model: Xterra 4x4 “Off Road”

Color: Ganite



Mods:

Shrockworks Sliders
Shrockworks Front Bumper
Shrockworks Rear Bumper W/ Tire Carrier, Hi-Lift Mount and Antenna Mount (On Order)
Shrockworks Skid Plates [Full Set] (On Order)
Lower Body Protection (Herculined)
Automotive Customizers 2.5" Front Coil Lift
Automotice Customizers 1.5" Rear Shackle Lift
Calmini 1.5" Rear Add-A-Leaf Lift (On Order)
AC Extended Stainless Rear Break Lines
Bilstein Long Travel Rear Shocks (20% Stiffer)
BFG MT 285/75R16 Tires
Rear Tow Hitch w/ shackle (for rear recovery)
Warn XD9000i Winch (w/ Amsteel Blue Synthetic Rope, Hawse Fairlead and self closing hook)
ScanGauge
Alpine HU
Cobra 75 WX ST CB w/ 4' Firestik
Hella 500 Driving Lights (mounted to bumper)
X-Tower Hi-Lift Mount
In-channel Vent Shades
Bug-Flector
Locking Roof Bin
Removed Rear Swaybar
Nissan Seat Covers (On Order)


Recovery Gear:

Warn XD9000i Winch (w/ 125’ x 5/16” Amsteel Blue Synthetic Rope, Hawse Fairlead and self closing hook)
60” Hi-Lift
Hi-Lift Off Road Base
Hi-Lift Off Road Kit (Winch Kit)
25’ Chain w/ Grab Hooks
30’ x 3” Recovery Strap
8’ x 3” Tree Saver
Folding Shovel
(2) 3/4" Clevis Shackles
Snatch Block (On Order)

Well now, I know why all the chicks dig you...:biggrin:

Damn, and I thought it was my good looks and amazing personality!

Well now, I know why all the chicks dig you...:biggrin:
:laugh-big: Ok, now that nearly made me pee my pants!!

Jim is taking pre-orders. I ordered it two weeks ago I think it was and at that time he said it was 4-6 weeks out before I would have it. I also ordered the skids.


I just ordered one. He promised me 4 weeks. Lets see who gets it first.

With shipping it was 549.00 what did he charge you?

I got the bumper with the tire carrier, hi-lift mount and antenna mount. So it was some place around $800. But I ordered the skid plates at the same time, so I got the 5% off. My total was some where around $1400.

Here are some newer pics.

http://jbeamphotos.com/albums/ECXC_2006-07-20_Paragon/ecxc_2006_paragon_060720_101242_6599.sized.jpg

http://jbeamphotos.com/albums/ECXC_2006-07-21_RC/ecxc_2006_rc_060721_103926_6890.sized.jpg

http://jbeamphotos.com/albums/ECXC_2006-07-21_RC/ecxc_2006_rc_060721_134110_6977.sized.jpg

That gives me mod fever again, and paychecks will be coming in soon. best of all, my woman is all for it, she loves wheelin with me!

Very nice truck! And your plans sound great too!

Dude, that is one bumpin looking truck. Nice work.