want to see what my bumper will look like with steel plating inserted in the open areas (in front of the radiator and on both sides, and below the radiator). here's the picture I'd like the design added to:

http://i649.photobucket.com/albums/uu220/clow2688/IMG00013.jpg

let me know if you could help me out by mocking this up on your computer, it would be appreciated (since i have zero skills with that kind of stuff)

want to see what my bumper will look like with steel plating inserted in the open areas (in front of the radiator and on both sides, and below the radiator). here's the picture I'd like the design added to:

http://i649.photobucket.com/albums/uu220/clow2688/IMG00013.jpg

let me know if you could help me out by mocking this up on your computer, it would be appreciated (since i have zero skills with that kind of stuff)

I'm passable at it.......any holes in the plating for air flow?

nope, i figured enough air would come thru the very bottom

Best I can do....

Plain
http://i71.photobucket.com/albums/i152/racerxxl/Xterra/Plain.jpg

and with a few vents
http://i71.photobucket.com/albums/i152/racerxxl/Xterra/Vent.jpg

def. like the solid better w/o the vents. Thanks Kelly! I"m trying to figure out what else is missing (besides shackles)...

Maybe some headlight protection tied in? perhaps tubing coming off the center hoop right above the support tube that makes that triangle? have it come straight across the top then a rolled 45 degree angle and end it where the middle tube starts to bend back towards the fender? ....if that even makes sense haha

def. like the solid better w/o the vents. Thanks Kelly! I"m trying to figure out what else is missing (besides shackles)...

Maybe some headlight protection tied in? perhaps tubing coming off the center hoop right above the support tube that makes that triangle? have it come straight across the top then a rolled 45 degree angle and end it where the middle tube starts to bend back towards the fender? ....if that even makes sense haha

Nope....you lost me. :spijt:

faaahhk, yeah i def. need paint.. NAY, photoshop trial! ah HAH, there we go, good for 30 days

faaahhk, yeah i def. need paint.. NAY, photoshop trial! ah HAH, there we go, good for 30 days

Download Gimp it's free.

Maybe some headlight protection tied in? perhaps tubing coming off the center hoop right above the support tube that makes that triangle? have it come straight across the top then a rolled 45 degree angle and end it where the middle tube starts to bend back towards the fender? ....if that even makes sense haha

Soo... kinda like this.
http://i330.photobucket.com/albums/l408/cait_brian/mod%20day%20march%207th/DSC02383.jpg

Soo... kinda like this.
http://i330.photobucket.com/albums/l408/cait_brian/mod%20day%20march%207th/DSC02383.jpg

uhhhhh same concept except bring the end of that protection bar closer to the front and still lookin nothing like what im thinking haha

If you brought it too much forward it would block the turn signal from the side.

That thing's sick, are you producing them or did you just build it for yourself?

Edit: The bumper. I was under the impression you built it yourself. Where did you get it?

Download Gimp it's free.

what the effffffff is gimp?

That thing's sick, are you producing them or did you just build it for yourself?

build what? are you talkin to me lol?

what the effffffff is gimp?

Come on you know...... the gimp!

http://i71.photobucket.com/albums/i152/racerxxl/Xterra/bring-out-the-gimp.jpg


or it's free photo manipulation software. :pfeilimkopf-big:

http://www.gimp.org/

That thing's sick, are you producing them or did you just build it for yourself?

I think it's Rockhumper.

Right on.

I think it's Rockhumper.

yeah, sorry chaser didn't know what you were talking about... yeha def. dockhumper, the greatest welds ive ever seen on steel. someone said he isnt fabbing right now because he is swamped with school and other aspects of life

here we go, downloaded paint for mac hahaha.... bare with the AMAZING sketch.....

http://i649.photobucket.com/albums/uu220/clow2688/bumper.jpg

comments? critiques? questions?

looking at this, maybe even plate those little triangles gap at the top?....

heres a couple quick edits.... what do u think?

http://i2.photobucket.com/albums/y15/Cdn_Spark/xterratest2.jpg
http://i2.photobucket.com/albums/y15/Cdn_Spark/xterratest.jpg

DAAAAAAAAMN I LIKE EM LOL

especially the one with the mesh, cool think you did with the lights too lol

those are cool, i just hate diamond plating lol. the american flag is real sick though, might have to do that somewhere..

those are cool, i just hate the american flag it makes me real sick

wow! Really wow :D Im messing...

couple more for you...

with light bars...
http://i2.photobucket.com/albums/y15/Cdn_Spark/xterratest4.jpg
couple other options for diamond plate and just rockerguard painted metal style...
http://i2.photobucket.com/albums/y15/Cdn_Spark/xterratest6.jpg
http://i2.photobucket.com/albums/y15/Cdn_Spark/xterratest5.jpg