Hello everyone,

I am currently running BFG All Terrians with measurements of 265 70 r16. With stock OEM wheels with measurements of 16"x7", lugs at 6"x5.5".

Now I wanted to get the American Racing ATX Chamber Teflon wheels. The measurements of 16"x8", lugs at 6"x5.5". I know they will fit on my BFG All Terrians but that is not my worry.

What I am worried about is the hub bore size on the American Racing Wheels. I looked everywhere and I cannot find the measurement. I can find every other measurement of this wheel except that.

I measured the hub size on my 2004 Nissan Xterra 2WD and it is a little less than 100mm or a little less than 4 inches.

Also, backspacing on my stocks is 5.5 inches w/ -40 offset and the backspacing on the American Racing wheels is 4.5 inches w/ 0 offset. Will I have rubbing issues? I know it will push out the wheel 1 inch so maybe.

Please help guys, no one can help me or give me a straight answer. Can anyone help me?

Thanks everyone

Good questions. I just tracked down a set of used Chambers and I've been wondering the same things myself.

spacer kit lol

Will a spacer kit correct hub bore size? "LOL"

I found a listing on ebay saying the hub bore size is 108 and the fitment guide on the american racing website says it will fit so you should be good. You will probably have to do a little plastic trimming but other than that they should fit just fine. Here's the link.

http://cgi.ebay.com/ebaymotors/17x9-Teflon-Wheel-American-Racing-Chamber-6x5-5-/140497454834

I passed on the Chambers. The seller wanted almost as much as they were new. I'll keep looking.