Hi Guys,

I would like to update everyone on the BlendMount for the ScanGauge ll.

BlendMount is NOW available at a group buy price of $45 regardless of quantity sold... Coupon code "NISSANGB" in our online store.
http://www.nexternal.com/mgt/product101

There are two different size mirrors in the Nissan trucks, a 3/4" diameter linkage and a 7/8" diameter linkage. To confirm which size you have, be sure to do the "nickel test"

http://www.mgtmotorsports.com/images/LINKAGEHEADS.jpg
Place a nickel on the side of the linkage. If the nickel is larger then the linkage (shown above) you have a 3/4" diameter linkage (heads). If the nickel is the same size as the linkage (shown below) you have a 7/8" daimeter linkage (tails).
http://www.mgtmotorsports.com/images/LINKAGETAILS.jpg

The 7/8" diameter collars were completed ahead of schedule. I picked them up Saturday and went straight to the Nissan dealer to install on a 2007 Titan. I dropped them off at anodizing today and will be ready Wednesday.

http://www.mgtmotorsports.com/images/BSG87508TITANSE1.jpg
http://www.mgtmotorsports.com/images/BSG87508TITANSE2.jpg
http://www.mgtmotorsports.com/images/BSG87508TITANSE3.jpg

Be sure to call 707-585-1175 or shoot Mike an email mike@mgtmotorsports.com if you have any questions at all.

Anybody use this mount? I wonder if it could be mounted upside down?