Anyone know where I can get an install guide or instructions to install the fog light kit from the below link?

http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=N50-FGLMP (http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=N50-FGLMP)

Alternatively, has anyone ever installed it for a 2006 and can tell me how difficult/easy it is?

Thanks!

The factory kit is easy to install.

Take a look at the kit on www.yournissanparts.com as they usually have cheaper prices.

For a how-to on the install, check out.
http://thenewx.org/phpbb2/viewtopic.php?t=68

The factory kit is easy to install.

Take a look at the kit on www.yournissanparts.com as they usually have cheaper prices.

For a how-to on the install, check out.
http://thenewx.org/phpbb2/viewtopic.php?t=68
They are a site sponsor also. Not sure what the discount code is for this site but you could use clbttn for 10% discount on already low price.

I agree, the install is simple if you have all the parts.

I agree, the install is simple if you have all the parts.
White...do the kits not always come with all the parts?

Thanks everyone for your responses...big help!

Hey there,
If you go over to thenewx.org,
Check out the How-To section, you'll find a complete guide to the install and a great bunch of people !

Regards,
Jim B

I installed a set of aftermarket foglights into the stock foglight opening, after some trimming, and then wired them up with the factory wiring and installed a new stalk switch. Took about an hour to do it all.

Venom do you have any pics or a write up?

do X models have the wiring for the fog lights there??? or is it just random on some models and not all?

- j

It's there. Cheaper for Nissan to include, but not use the harness versus making an entirely new harness without attached options.

hey i just finished installing them on my X and there is about 1/4 gap between the lights and the bumper and I hooked everything in nice and tight but it seems like its not secured as weell as I though with only one screw per light....I have an 07 but I noticed the side with the green clip if u push on it, that side can pop out...

hey guys i just finished installing my fog lights on my 07 x. I noticed its not as secure as I thought it would be with only one bolt and all and just the green clip. I noticed if u push on the front of the fog light u can pop out the side with the clip or worse yet u can move it up and down and change the angle without meaning to. I fastened everything perfectly believe me I checked everything twice. Is this just how thye are meant to be? also I have a gap on the bottom of the lights in the bumper I thought it would be flush with the holes for the fog lights

sorry about the double post, computer said there was error and first message did not go through....weird

Hey also is there a way to raise the level of the light it seems to me the light when on is kinda pointing down toward the street rather then straight on like the head lights.:clueless: