first, I know a few of you here from wheeling and over on club Frontier including JASON3904 whom I wheel with and a fellow member on Texas Nissan Offroad. So here info on a group buy I started on CF, you can ask questions here and pm me. I have my email linked since I dont have an X, but am very much into our shared truck platform and currently building my VQ40 with billet rods, forged pistons, Ported heads, Brian Crower cams and springs. along with custom Uprev tune and modded Stillen blower to put out 12psi up from 7psi, and complete self fabbed hiflo stainless exhaust from the engine to the tail pipe should put me to 350-375rwhp up from 308....so back to the pods.


Ok Ya'll, after much discussion and shipping stuff back and forth, this is the "OFFICIAL" group buy to bring a product to market. Specifically dual guage pods, "A" post piece. This will be 1 piece injection molded like the factory piece retaining the grab handle. The cost is $69 color matched (need trim color code, on label on drivers door opening, my code is Z)$59 unpainted and shipping will cost between $10-15 (USPS only). Please add $2 to cover Paypal fees or I'll end up eating them X's 20. Once we reach 20 prepaid orders I'll send the money to Lotek, then approx 4 weeks later they'll ship to each person.

I need everyones name and screen name plus shipping address. If for any reason you want to get out of GB for any reason (up until we hit 20), let me know and I'll refund your money through Paypal. Once we hit 20, then you are in and the money is gone..Any questions let me know and PM for paypal info..Also feel free to cross post in other forums like Xterra and Pathy since the A post will fit all 05-09 Frontier, Pathfinders, and Xterras.
LOTEK http://www.gaugepods.com

To keep things simple, use the form below to send your info:

Name:
Screen name:
Forum:
Shipping Address:
Trim color code:

NOTE**** THE BELOW PICS ARE MOCK UP IN MY TRUCK TO GIVE YOU PLACEMENT AND VISUAL. TO SEE PICS OF FINISHED PRODUCTS IN A TITAN GO TO THIS THREAD ON CF
http://www.clubfrontier.org/forums/f27/brutals-gauge-pillar-gb-46563/

http://i208.photobucket.com/albums/bb20/brutal2005/VQ40%20BUILD/P6040023.jpg
http://i208.photobucket.com/albums/bb20/brutal2005/VQ40%20BUILD/P6040022.jpg
Per request here are Loteks' Titan setup only triple pod in attachments

Dude......You really need to steal those pics of final product or you will never get a sale.

PEOPLE follow the link and take a look at the final product.

dude......you really need to steal those pics of final product or you will never get a sale.

People follow the link and take a look at the final product.
done per your request

So what kind of gauges will this display? We don't have Tranny temp so thats out of the question....any others?

to get the tranny temp all you need to do is tap a sensor into the tranny pan... james has one on his X

yes tranny temp is easy in the pan. Drill hole and use the pan adapter to thread a sender into. I use vacuum/boost gauge, and a wide band 02. you need look no further than summit racing. Pods fit 2 1/16" gauges
http://summitracing.com/search/Department/Gauges-Accessories/

So...does this fit over the existing A-pillar trim? Or does it replace the trim?

So...does this fit over the existing A-pillar trim? Or does it replace the trim?

it replaces it entirely, its molded just like the stock piece with gauge pods as if came from the factory that way

So do you lose the grab handle?

so do you lose the grab handle?

no you take your grab handle off and reattached with your new a pillar