and that would be a 3" Body lift with EVERYTHING ill need

or at least find everything in one place

I would suggest going with the 2" BL rather than the 3"

Its much simpler, much less labor intensive, and there's less stuff to break. (also no cutting or welding with the 2")

think i can stuff 35s under it with a 2" bl?

This is Ken from NY... 3" SL, 2" BL. 35" MTR's with NO RUBBING.

http://pic14.picturetrail.com/VOL554/459177/12785216/188577597.jpg

http://pic14.picturetrail.com/VOL554/459177/12785216/188577581.jpg

NOTE: He did have to do some trimming around the fenders, but after talking to him about it, and seeing the truck in person I would still go this route rather than the 3" BL


This was before the trimming:

http://pic14.picturetrail.com/VOL554/459177/4899980/170137854.jpg

wow, thanks, you just saved me alot of time, $, and stress!!